Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System - Gas
(243 reviews)
Price: $178.41
In Stock
Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System - Gas
Item # RM-766
Retail:$278.95
Our Price: $178.41
You Save: $100.54
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (243)
- Q & A (0)
- Photos
Roadmaster Accessories and Parts - RM-766
- Tow Bar Wiring
- Auto Battery Disconnect
- Roadmaster
Conveniently disconnect the battery of your vehicle so you can flat tow it behind your RV per manufacturer instructions. Provides a charge for the breakaway switch and other accessories without draining the battery. For gas engine vehicles only.
Features:
- Disconnects your battery with the flip of a switch so that your vehicle can be towed behind your RV
- Eliminates inconvenience and the potential danger of pulling your battery cable
- Provides a positive current source for the breakaway switch and other accessories without draining the battery
- Operates with included switch
- Includes a corrosion-resistant, marine-grade solenoid with 200-amp constant duty and 600-amp surge
- Comes pre-assembled for easy installation
Specs:
- Application: only for vehicles that require the battery disconnected for flat towing - consult your owner's manual
- Works with almost any 12V battery
- For gas engine vehicles only
Notes:
- Not for use with diesel engine vehicles; due to the high compression ratio of diesels, the engine can surge up to 10 times that of a gasoline engine at start up and can cause the solenoid to fail.
- Disconnecting the battery, whether manually or with the Roadmaster automatic disconnect, will affect your vehicle's electronics. You will need to reset various electrical components in your vehicle following use of this product.
- A charge line kit (RM-156-25 - sold separately) is recommended if you have a braking system that is using power from the towed vehicle's battery while it is disconnected.
766 Road Master Automatic Battery Disconnect for Gasoline Vehicles
Replaces 765
Installation Details
This Product Fits The Following Vehicles
- 2020 - 2024 Chevrolet Blazer
- 2022 - 2022 Mercedes-Benz C-Class
- 2015 - 2024 GMC Canyon
- 2022 - 2022 Mercedes-Benz CLS
- 2015 - 2024 Chevrolet Colorado
- 2006 - 2011 Dodge Dakota
- 2010 - 2011 Ram Dakota
- 2015 - 2018 Ford Edge SE
- 2015 - 2018 Ford Edge SEL
- 2015 - 2018 Ford Edge Sport and Titanium
- 2019 - 2024 Ford Edge ST models
- 2020 - 2023 Buick Encore GX
- 2024 - 2024 Buick Envista
- 2023 - 2024 Chevrolet Equinox LS and LT
- 2023 - 2024 Chevrolet Equinox Premier
- 2023 - 2024 Chevrolet Equinox RS models
- 2008 - 2009 Chevrolet Equinox Sport
- 2015 - 2024 Cadillac Escalade
- 2016 - 2019 Ford Explorer
- 2011 - 2019 Ford Fiesta Automatic transmission
- 2016 - 2019 Ford Flex
- 2012 - 2018 Ford Focus Hatchback - Automatic transmission
- 2012 - 2018 Ford Focus Sedan - Automatic transmission
- 2008 - 2017 Smart fortwo
- 2013 - 2013 Jeep Grand Cherokee
- 2008 - 2009 Hummer H2
- 2008 - 2011 Jeep Liberty
- 2019 - 2022 Chevrolet Malibu
- 2016 - 2019 Lincoln MKT
- 2019 - 2024 Lincoln Nautilus See All Vehicle Fits
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System - Gas - RM-766
Average Customer Rating: 4.7 out of 5 stars (242 Customer Reviews)
Conveniently disconnect the battery of your vehicle so you can flat tow it behind your RV per manufacturer instructions. Provides a charge for the breakaway switch and other accessories without draining the battery. For gas engine vehicles only.by: Dale04/13/2023
I had a little difficulty finding a good location for the solenoid, but finally found a spot on the radiator bulkhead. Since the photo was taken, I have added silicone boots over all of the solenoid connections.
by: Aaron03/31/2024
I highly recommend this battery disconnect for the 2024 GMC Sierra Denali 1500. The electronic parking brake requires the battery to be disconnected while flat towing. GM should have made the vehicle software to not apply the brake when in Tow-mode, this makes it easy to accomplish removing battery power. I mounted the solenoid inside the passenger front quarter panel near the battery to keep the power cables as short as possible. The solenoid must be installed in the vertical position. I chose to mount the actuator button inside just above the OBD-II port under the steering column. Easy access from the driver seat but not visible or in a place that could be accidentally pushed. If you frequently flat tow the GMC/Chevy with electronic parking brakes, this is a must have!
by: 02/14/2023
Fairly easy install. Routing the wiring is the most time consuming part. I would've liked to have had heat shrink terminals sent instead of just crimp terminals but overall its a great product so far!
(Also, I would recommend using a brown wire to link the lighting together in the rear as opposed to the white wire that is recommended in the instructional video, to keep everything clear for anyone who may work on it in the future)
by: Richard 02/20/2024
i tried other types over the years, this does cost a little more but it works great, this is the 3 one i have install and on the next car i will only use this from roadmaster the best disconnect hands down...
by: Jim 04/18/2024
This disconnect switch is heavy duty and is very simple to install.
by: Mark 03/22/2024
The battery disconnect was exactly what I needed for my new truck. Shipped quickly and arrived early.
by: Mike06/30/2019
The battery disconnect installation instructions were clear and the installation went well in my 2018 Chevrolet Colorado ... in spite of the kit missing a few pieces like a second star washer for connecting the two battery cables and the second piece of protective tubing. I covered the exposed energized solenoid terminals with electrical tape to prevent an potential inadvertent short in the future when working under the hood. Works as designed so far.
Mike
7/1/2020
I towed the Colorado from Maine to Arizona last winter and the battery disconnect worked well for the entire trip. It made preparing the truck for towing and driving very easy!
by: Robert Martin09/09/2016
I received the Roadmaster remote battery disconnect in a timely manner and had it installed in my 2016 Chevy Colorado by a local RV dealer. I used it for the first time this week and it worked like a charm. I didn't lose any of my preset radio stations or any other data that I know of. Pushing a button on the dash is a lot easier than disconnecting and reconnecting battery cables.
Robert M.
9/9/2017
Still working just fine.
by: Tim 11/28/2023
This was very easy to install on my 2022 GMC Canyon. I installed the button on the side of the dash, between the driver door and dash side. This way it is hidden out of view. I did the installation this way to avoid any modification to the lower dash support panel.
by: Herbert M07/09/2017
The RM-766 is a solid piece of hardware and comes with absolutely everything required for the install, right down to the "Tow" and "Drive" stickers for the switch. I use it to disconnect the battery in my 2016 Ford Edge 3.5L AWD, to help make it flat towable behind my RV. It works great and I do not have to open the hood and mess with battery cables while travelling. I like it.
Herbert M.
7/13/2018
There have been absolutely zero problems with this switch so far. Works like a charm.
by: Jahi05/02/2024
I'm impressed with Cloda communication regarding my order. She responded and satisfied all of my concerns. Also my package arrive one day early and she texted me to inform me that she received notice that the package had been delivered.
by: Jaime04/17/2024
The best customer service. The really know all about rv accessories
by: James08/15/2023
Battery disconnect was bad. Waiting on replacement for 5 days now.
Jenny N.
8/18/2023
I checked with Roadmaster and I know that they are working on a replacement for you.
by: Dale09/16/2023
The first one was damaged in shipping and they sent a new one out as soon as I called at no cost to me! Great customer service! If you follow the directions it’s a fairly simple installation. It works great. One note of caution the actual plug on the disconnect buttons can be inserted two ways but will only work one way.
by: Marty 10/05/2023
The battery disconnect works flawlessly and makes hooking up the towed vehicle so simple. Highly recommend!
by: Ralph B.11/19/2016
I have a 2014 Silverado that I wanted to tow with my RV. In order to tow GM calls for the battery to be disconnected. This was the only product that I fond that would do what I wanted. It is slightly over priced in my opinion but it does the job. I have attached it to my aftermarket air box and ran the switch under the hood release. This way I can use the remote to unlock the doors when I am ready to unhook.
by: Doug03/20/2024
Another excellent product for the right price. Fast shipping and excellent service. Thanks.
by: Brian06/28/2022
This product works great for our 2018 Ford Explorer. It works perfectly for our application and allows us to easily disconnect the vehicle battery when we are preparing to tow the Explorer.
by: Scott 08/22/2023
Excellent product. Good instructions. Works perfectly after a full year.
by: Kevin 05/09/2023
Overall an easy 5 star rating. I read the instructions multiple times and still managed to hook up the cables backwards. Switched them and everything works fine. I really appreciated everything that you would possibly need being included - instructions said to bolt the unit in place but it worked out better for me to use the INCLUDED self tapping metal screws. Shrink wrap, protective cable looms, zip ties - you name it and it's in the box.
I installed this in my 2022 Chevy Colorado which requires the battery to be disconnected before flat towing.
by: Woodruff03/28/2024
The stuff not here
by: Dennis 02/01/2024
Great description and product arrived by date promised.
by: Garbear07/08/2023
works great and the instructions were easy to follow
by: Steve 02/01/2024
Ordering went well.
by: Tony 03/28/2023
I ordered a complete set up for flat towing my chevy truck you guys were so helpful with all the parts and your tech service was excellent as well,thank-you so much
25
243
Show More Reviews
See what our Experts say about this Roadmaster Accessories and Parts
- What Battery Disconnect do You Recommend to Use with My 2020 GMC Sierra 2500?When you say you have 2 batteries, I am assuming you may have a diesel model. Even if this is the case, you still only need one battery disconnect kit. This is because batteries are wired together on a single system. If you use the disconnect on one battery, this automatically cuts off power to the second battery since the first one is not emitting power. With that being said, the correct battery disconnect switch you need for your 2020 GMC Sierra 2500 is the Roadmaster Automatic Battery...
view full answer... - Roadmaster Direct-Connect Base Plate Kit with Removable Arms for 2022 RS Trim Chevrolet TrailBlazerThe Roadmaster Direct-Connect Base Plate Kit, # RM35FR will not fit the RS model of the 2021 Chevrolet TrailBlazer. We do however have three options that are a confirmed fit for the RS model of the 2021 Chevrolet TrailBlazer. The Roadmaster Crossbar-Style Base with removable arms, # RM96VR. The Roadmaster Direct-Connect Base with removable arms, # RM46VR. And the Blue Ox Base Plate Kit, # BLU49FR. These are all confirmed fit for the 2021 models, not yet listed as such for the 2022....
view full answer... - Can the Automatic Battery Disconnect Be Used On a 2019 GMC Canyon Diesel I do have an option for you but the Roadmaster Automatic Battery Disconnect part # RM-766 will not work on any vehicle with a diesel engine no matter the number of batteries due to power surges. Instead, you can use the Deka Lead Quick-Disconnect Battery Terminal part # DW05312 or you can use the Epicord Battery Disconnect Switch with Key part # 277-000096 and mount it inside the vehicle. I have attached some other items you will need to flat-tow a 2019 GMC Canyon below. Roadmaster Direct-Connect...
view full answer... - Recommended Flat Towing Components For A 2015 Smart FortwoThe only compatible baseplate kit for a 2015 Smart Fortwo is the Roadmaster EZ Base Plate Kit # 52285-1 which would also be compatible with the etrailer SD Non-Binding Tow Bar # e44ZR that you referenced. I do want to note that this will not be compatible with electric drive models. To transfer your braking and turn signals through the vehicle you'll need the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. The owner's manual...
view full answer... - Recommended Flat Towing Set Up for a 2020 GMC Canyon 4WD w/out Adaptive Cruise ControlThe best base plate kit for your 2020 GMC Canyon 4WD without adaptive cruise control is going to be the Roadmaster Direct-Connect Base Plate Kit item # RM-523182-5. These direct-connect brackets provide attachment points for your Highthawk tow bar. The arms are removable for a clean look when you are not flat towing your Canyon. This base plate kit will work great with the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar item # RM-676 you mentioned. This tow bar kit has all the safety...
view full answer... - Recommended Blue Ox Baseplate and Flat Towing Parts for a 2022 Chevy TrailblazerThe Blue Ox Base Plate Kit - Removable Arms Item # BO74FR are not a confirmed fit for a 2022 Chevy Trailblazer but the Blue Ox Base Plate Kit - Removable Arms Item # BLU49FR are and will work with your Blue Ox tow bar without needing an adapter. You'll want to ensure that the tow bar you have is rated to handle the weight of your vehicle prior to towing it. You'll also need a tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below: Tow...
view full answer... - Flat Towing Recommendations For A 2021 Chevy Colorado Z71The Demco Tabless Base Plate Kit - Removable Arms Item # DM9519319 will fit your 2021 Chevy Colorado as long as it doesn't have adaptive cruise control. If you do have adaptive cruise control I recommend the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # RM57VR. The Demco Commander II Non-Binding Tow Bar # DM9511012 you linked to will work with the # DM9519319. You will also need tow bar wiring and a braking system. I have the following recommendations for your below: Tow...
view full answer... - Recommended Baseplate For A 2008 Jeep Wrangler JK With Warn Elite Series Winch BumperThe etrailer Invisible Base Plate Kit # e98949 was designed to fit a standard factory bumper so you'll need the Roadmaster Direct-Connect Base Plate Kit # 1430-3 instead. Installation Notes: Trimming the shock absorption pad, active air shutter louvers or housing, lower air dam, air deflector, cowling and/or rock guard is required on this model. This bracket fits Moper/Warn bumpers having part number 82211715, 82211715AB, 8221175AC or 82209740AD and skid plate part numbers 82210401 or...
view full answer... - Are Frame Holes Required To Install Roadmaster Direct-Connect Base Plate Kit On a 2018 Ford FlexYes, you will need to drill one hole in each side of the frame in order to install the Roadmaster Direct-Connect Base Plate Kit part # RM-524435-5 on a 2018 Ford Flex. I have attached a photo for you that shows this per step 15 in the instruction manual. That said, don't let this scare you as there will be no affect on the structural integrity of the vehicle once done so. Furthermore, there is not a no-drill base plate kit available for a 2018 Ford Flex and it is very rare in general that...
view full answer...
- Parts Needed to Flat Tow 2020 Chevy Spark Behind MotorhomeI can absolutely help set your 2020 Chevy Spark up so that it can be flat towed behind your motorhome, as long as it has a manual transmission. To do this you will need a base plate kit, a tow bar, safety cables, a lighting solution, a supplemental braking system, and possibly a high-low adapter. I will quickly list my specific recommendations below and then go into further detail on each further down. Base Plate Kit - Roadmaster Direct-Connect # RM-523202-5 (excludes ACTIV models) Tow...
view full answer... - Is There a Base Plate Kit That is Confirmed to Fit the 2023 Chevrolet ColoradoYes, we do have a base plate that is confirmed to fit your 2023 Chevrolet Colorado. That is the Blue Ox Base Plate Kit # BLU85CR. In addition to the base plate kit, you will need at least 4 other main parts to flat tow your Colorado. Those parts are a tow bar, safety cables, tow bar wiring and a supplemental braking system. I have included a list of these parts below that work with your Colorado and that Blue Ox base plate kit. Tow Bar: Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380 (also...
view full answer... - What Diode Wiring Kit Do I Need To Go With The Brake Buddy Stealth Supplemental Braking System Since the Brake Buddy Stealth Supplemental Braking System # HM39530 comes with it's own special 6 to 7-way adapter cable and port all you'll need is the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-152 to send your motorhome's signals through your Jeep's tail lights. Your Jeep has combined wiring so you will need to install the Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400. This will prevent your braking signal from overriding your turn signal, which is important...
view full answer... - Easy Way to Disconnect Battery When Flat Towing a 2020 Jeep Grand Cherokee TrailhawkWe have to recommend you stick with what the manufacturer recommends for flat towing your 2020 Jeep Grand Cherokee. Otherwise you run the very high risk of damaging the vehicle when flat towing it. Disconnecting the battery will reset your stereo presets, but it's better than having to have the transmission rebuilt. We do have the automatic battery disconnect kit part # RM-766 which will even put a maintenance charge on the towed vehicle battery as you are travelling. This would be your...
view full answer... - Can a 2021 Chevrolet Silverado 1500 4x4 Be Flat Towed?Since your 2021 Chevrolet Silverado 1500 has a transfer case that would indicate that it is 4WD and it can be flat towed. To flat tow your vehicle, you're going to need to do the following: 1. Position the vehicle being towed behind the tow vehicle, facing forward and on a level surface. 2. Securely attach the vehicle being towed to the tow vehicle. 3. Apply the parking brake and start the engine. 4. Shift the transfer case to N (Neutral). 5. With the engine running, release the parking...
view full answer... - Recommended Complete Flat Towing Setup for a 2023 Chevrolet Traverse W/ Lower Active Shutters Hey Marty, you can't go wrong with either and they basically do the exact same thing, so if it were up to me I'd go with the Demco Air Force One # SM99243. They (Demco) have a pretty good track record with this system, and a lot of people have used this and been very satisfied with it. Alright with that out of the way, you're still going to need: -A base plate kit ; Since you have active shutters your only option is the Blue Ox Base Plate Kit # BLU63CR, not a bad choice by any means and...
view full answer... - Recommended Flat Towing Equipment For A 2016 Ford Edge Titanium V6 If your 2016 Ford Edge Titanium V6 is AWD then yes, you will be able to flat tow your vehicle (all four wheels down). If your model is FWD then you will need to dolly tow your vehicle with the front wheels off of the ground with a tow dolly like the # DM9713093. To flat tow your 2016 Ford Edge Titanium V6 you'll need a tow bar, tow bar wiring kit, base plate, braking system, and safety cables. There is also a few steps listed in your owner's manual that you'll need to follow to ensure...
view full answer... - Wiring Needed to Charge Battery While Flat Towing a 2022 Buick Encore GXIt sounds like you're searching for the parts needed to add a charge line for when you're flat towing your 2022 Buick Encore GX. To accomplish this I recommend using the Flexo-Coil Wiring Kit # RM-15267 and the Charge Line Kit # RM-156-25 which will connect to the center pin on the 6-Way socket that comes with the wiring kit. If you need to add the 12V power to your RV side then you'll also need the kit # RM-156-75. I took a look at the online owner's manual for your vehicle and I did...
view full answer... - Recommended Flat Towing Components For A 2016 Chevy Colorado 4x4 To upgrade your 2013 Thor ACE motorhome's 4-way to a 7-way you'll need the Universal Installation Kit for Trailer Brake Controller # ETBC7. This kit will plug into your 4-way and require you to run additional wires for the battery (with a fuse), to the brake controller output wire, ground, and auxiliary power. I've attached a video below to help with this process. Once the 7-way is installed you can begin with the flat towing side by getting a tow bar, base plate, tow bar wiring kit,...
view full answer... - Parts Needed to Flat Tow 2020 Chevy SpartAccording to my research, manual transmission equipped models of the 2020 Chevy Spark are indeed capable of being flat towed. Automatic transmission equipped vehicles would need to be dolly towed, using a tow dolly like # RM-2050-1. If your Spark has a manual transmission, you'd need a tow bar like the Roadmaster # RM-522 Falcon 2 All Terrain Tow Bar that you looked at, a base plate kit, safety cables, a wiring harness to connect to the motorhome, a supplemental braking system and possible...
view full answer... - How Does Automatic Battery Disconnect Work on 2016 GMC Sierra 1500 w/Negative Battery Cable RemovedThe Roadmaster automatic battery disconnect # RM-766 has a switch that mounts inside the vehicle. Flip the switch and it automatically disconnects the battery power from the rest of the truck so you will not have to disconnect any battery cables. Roadmaster has determined the disconnect will work best on your truck by disconnecting the positive cable. You should not use # RM-766 on the negative battery cable on the newer Chevy or GMC trucks. The battery power has to be removed for your...
view full answer... - Flat Towing Setup Recommendation For A 2022 Buick Encore GXFor your 2022 Buick Encore GX, you're going to need a high low adapter, a base plate, a tow bar, wiring a braking system, and safety cables. Let's start with a base plate, I recommend the Roadmaster Direct-Connect Base Plate Kit # RM32FR. This base plate creates a clean design when not in use and allow for quick connection and disconnection. Next, you'll need a tow bar. For this, I recommend the Roadmaster Falcon 2 # RM-520. This tow bar is capable of handling up to 6,000lbs, which is...
view full answer... - Can A 2021 Chevrolet High Country 4x4 Diesel Be Flat Towed The owner's manual for a 2021 Chevy Silverado states to "Only dinghy tow four-wheel-drive vehicles with a two-speed transfer case that have an N (Neutral) and a 4 n (Four-Wheel Drive Low) setting" so you will be able to flat tow your 2021 Chevy Silverado High Country 4x4. To flat tow you'll need a tow bar, base plate, tow bar wiring kit, braking system, and safety cables. I have the following recommendations for you below: Tow Bar: Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar...
view full answer... - What Else is Needed to Flat Tow a 2014 Jeep Wrangler Unlimited with a Roadmaster Sterling Tow BarTo pair up with the Sterling All-Terrain, part # RM-576, use the Roadmaster Direct Connect base plate kit, part # RM-521448-5, as long as you have the standard factory bumper. This way you won't have to use any adapters. You do need different safety cables because the ones included with the Sterling don't fit the base plates. Instead use part # RM-643. You also need a wiring harness and braking system to tow your 2014 Jeep Wrangler Unlimited. Since the Sterling comes with a connector...
view full answer... - Does Installation of the Roadmater RM-765 Auto Battery Disconnect Charge the 2008 Honda CR-V BatteryThe Roadmaster Auto Battery Disconnect, item # RM-766, includes all of the parts needed for installation on your 2008 Honda CR-V, and supplies a trickle charge from the towing vehicle to the towed vehicle battery when properly installed. You will not need to remove the fuse for flat towing if the battery disconnect is installed on your vehicle.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
John S
Written by:
Laura H
Test Fit:
Randy B
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Kevin C
Test Fit:
Bradley B
Test Fit:
John A
Updated by:
Wilson B
Updated by:
Isabelle B
Updated by:
Carrie F
Updated by:
Amanda K
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Charles A
Video by:
Ethan H
Video by:
Rick G
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dale
4/17/2024
Works great.